Samsung Galaxy S24+ Also Pictured in CAD Renders

Samsung has registered a flurry of leaks regarding the Galaxy S24 series lately and it included some CAD renders for the Galaxy S24 Ultra and then we had some for the S24 and now S24+. The latter gets checked out below.

Samsung will put a 6.7 inch Dynamic AMOLED 2X panel on the Plus model. It’s revealed that the design has improved slightly from the predecessor. We’re dealing with a device that’s taller, narrower and thicker than the Galaxy S23+. The leak comes from @OnLeaks, supplying us with 5K CAD renders and 360 degree videos of the upcoming Samsung Galaxy S24.

The CAD renders come after we learned that Samsung may debut its phones on January 18th 2024. We get a triple back camera and I’d be shocked if the optical zoom goes past 3X this time. The bezels of the screen are a bit narrower and the position of the LED flash has changed compared to the S23 and S23+.

The UWB antenna can be seen on the right side and Samsung will equip the device with an aluminum frame, instead of the titanium rumored for the S24 Ultra. S24+ will measure 158.5 x 75.9 x 7.75 mm and weigh 195 grams. It’s expected with a 6.7 inch Dynamic AMOLED M13 panel, a Snapdragon 8 Gen 3 processor, up to 12 GB of RAM and up to 1 TB of storage.

Expect a 4900 mAh battery inside, 45W charging and IP68 certification.

via giznext

About 
Passionate about design, especially smartphones, gadgets and tablets. Blogging on this site since 2008 and discovering prototypes and trends before bigshot companies sometimes