The motherboard is an integral part of the iPhone because it is responsible for the operation of all parts of it. If there are some particles or dirt on your iPhone motherboard, it can affect your phone’s performance. It is especially true for those who use their phones very often and in different environments, such as dust or water. The dust can be found everywhere, even on keyboards and computer mice.
When you touch these places, you will get some dust on your fingers and then transfer to other devices such as smartphones. This is why you need to clean the iPhone motherboard before using it again. If you want to use your iPhone for a long time without problems, then you should know how to clean the iPhone motherboard so that it does not get damaged easily by dust or water.
Why do you need to clean your iPhone motherboard?
Maintaining the cleanliness of the motherboard is vital for any electronic device. There are several reasons why you need to clean your iPhone motherboard. For more information consult the motherboard guide.
- To prevent overheating: If there are too many dust particles on your iPhone motherboard, it can cause overheating, which will damage your device
- To avoid short circuits: Overheating can also result in short circuits that can destroy your phone permanently.
- To prevent fire hazards: When too much dust accumulates on your iPhone motherboard, it could catch fire.
How to clean iPhone motherboard: Step by Step
You might be wondering why you need to clean your iPhone motherboard. It is essential to do so because dust and other contaminants can damage your device’s motherboard, a component in the phone that controls how it operates.
For example, if you have a power source that’s not working properly due to a dirty motherboard, then this can cause your phone to turn off unexpectedly or even stop working altogether. The good news is that if your iPhone motherboard needs cleaning, you can do it yourself at home with just a few simple steps. To get started, you will need:
- A flat screwdriver
- An alcohol-based cleaner (or rubbing alcohol)
- Toothbrush
Once you have the apparatus mentioned above, you are all done to follow these steps to clean the motherboard of your iPhone:
Step 1: Remove the SIM card tray from your phone. You can do this by sliding out the tray using your fingernail and then placing it on the SIM tray eject button until it pops out of place. Once this is done, remove any cards from the tray and put them aside, for now so they do not get damaged during cleaning.
Step 2: Use an alcohol-based cleaning solution to wipe down every part of the phone, including both sides of the display screen, battery cover, and back housing area, where dust often builds up over time. Ensure that you use only a microfiber cloth or soft paper towel when wiping down these areas, as anything else may scratch or damage your screen or housing.
Step 3: Take a clean microfiber cloth or soft paper towel and apply some rubbing alcohol onto it before wiping down each part of your phone again. If there is still any dirt left behind after doing this step, then repeat it until all dirt has been removed from each component.
Step 4: Use the same method as before to remove any remaining dirt from each component in your phone one at a time. After the cleaning is done, it is time to put everything back together.
Wrapping It Up
To clean an iPhone motherboard, you do not need to use any special tools. All you need is a small brush or cloth and some cleaning materials. If any dust particles are present in the motherboard, they can affect your iPhone’s performance, so you need to clean them.
Recent comments